CONCRETE ADMIXTURES
Accord Chemicals’ Concrete Admixtures enhance workability, strength, and durability, offering advanced solutions for all concrete projects.
HIGH RANGE WATER REDUCERS
CONCRETE ADMIXTURES
4TH GEN. SUPERPLASTICISER
ACCOPLAST AC30 is a high performance Concrete Admixture for high strength concrete and using advanced polycarboxylate Polymer technology & provides appreciable water reduction along with longer work ability retention for extended period of time.
It does not contain added chlorides or chemicals.
Shelf Life
12 Months
AREA OF APPLICATION
- Water reduction up to 40%
- Self compacting concrete(SCC)
- Artificial Stone Concrete manufacturing.
- Highly suitable for readymix concrete and concrete requiring extended period of workability
- Readymix and pre-cast concrete industries where high workability and Slump retention is required.
ACCOPLAST SP2005
SUPER-PLASTICISER – WATER REDUCER
ACCOPLAST SP2005 is a concrete super plasticizer or water reducing agent and its intended to permit concrete to attain a better performance in plastic & hardened state.
Large as well as difficult pours can be made by using this product as this gives extreme workability with concrete mixes. & also helps in increasing the flow of the cement paste.
Shelf Life
12 Months
AREA OF APPLICATION
- Enables easy flow, better workability and excellent durability.
- Provides high strength in early stages and imparts excellent surface finishes.
- Beautiful concrete appearance with higher quality.
ACCOPLAST GRC M1
GRC ADMIXTURE
ACCOPLAST GRC M1 is a liquid plasticizer or water reducing agent designed to improve workability of concrete mixes without significantly increasing setting times.
It is manufactured from carefully selected materials. It is very special admixture of GRC application.
Shelf Life
12 Months
AREA OF APPLICATION
- Suitable for high ambient conditions.
- Concrete containing ACCOPLAST GRC M1 is tested and no disadvantages were found in terms of durability and strength.
MID RANGE WATER REDUCERS
ACCOPLAST P1 (Powder)
GRC ADMIXTURE
ACCOPLAST P1 is particularly useful for imparting extreme workability to cementitious mixes and cement based grouts. ACCOPLAST P1 also acts as a water reducing agent.
P1 is tremendously powerful deflocculating agent operates by dispersing cement into its primary particles which dramatically increases the flow characteristics of the cement paste.
Shelf Life
12 Months
AREA OF APPLICATION
- ACCOCONCRETE SUPERPLASTICIZER can be used in dry mix concrete or cement based powders to get better workability or lower w/c ratio.
- The concrete becomes self-compacting and no vibration is required to achieve a dense and void-free concrete.
- ACCOPLAST P1 is particularly valuable in cement based grouts where a reduction in the water/cement ratio in the region
of 20% – 25% can be obtained, which is reflected in higher strengths and reduced bleeding.
ACCOPLAST P9
CONCRETE PLASTICISER 4TH
ACCOPLAST P9 is a liquid concrete plasticizer. This also acts as a water reducing agent. This product improves the workability of concrete and permit effective reductions in free water content.
ACCOPLAST P9 is effective over a wide range of dosage levels, giving the desired effect in concrete without producing any detrimental retardation result.
Shelf Life
12 Months
AREA OF APPLICATION
- Permits excellent water reduction.
- Improve the strength of concrete and durability.
- ACCOPLAST P9 used to modify concrete mix designs to give improved slump retention and allow more time for
placement and compaction. - ACCOPLAST P9 exhibits excellent retention of workability at both low and high addition rates. While giving limited
set retardation properties. This is particularly prominent under hot weather conditions.